Initial 2Gi sizeLimit didn't take effect because Kyverno's tier-defaults
LimitRange in authentik ns applies a default container memory limit of
256Mi to pods with resources: {}. Writes to a memory-backed emptyDir count
against the container's cgroup memory, so the container was OOM-killed
(exit 137) at ~256 MiB even though the tmpfs sizeLimit said 2Gi. Confirmed
with `dd if=/dev/zero of=/dev/shm/test bs=1M count=500`.
Fix: also set `containers[0].resources.limits.memory: 2560Mi` via the same
kubernetes_json_patches. Verified end-to-end — 1.5 GB file write succeeds,
df -h /dev/shm reports 2.0G.
Updates the post-mortem P1 row to capture this for future readers.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Generated by `terragrunt render-json` for debugging. Not meant to be
tracked — a stale one was sitting untracked in stacks/dbaas/.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
## Context
On 2026-04-18 all Authentik-protected *.viktorbarzin.me sites returned HTTP
400 for all users. Reported first as a per-user issue affecting Emil since
2026-04-16 ~17:00 UTC, escalated to cluster-wide when Viktor's cached
session stopped being enough. Duration: ~44h for the first-affected user,
~30 min from cluster-wide report to unblocked.
## Root cause
The `ak-outpost-authentik-embedded-outpost` pod's /dev/shm (default 64 MB
tmpfs) filled to 100% with ~44k `session_*` files from gorilla/sessions
FileStore. Every forward-auth request with no valid cookie creates one
session-state file; with `access_token_validity=7d` and measured ~18
files/min, steady-state accumulation (~180k files) vastly exceeds the
default tmpfs. Once full, every new `store.Save()` returned ENOSPC and
the outpost replied HTTP 400 instead of the usual 302 to login.
## What's captured
- Full timeline, impact, affected services
- Root-cause chain diagram (request rate → retention → ENOSPC → 400)
- Why diagnosis took 2 days (misattribution of a Viktor event to Emil,
red-herring suspicion of the new Rybbit Worker, cached sessions masking
the outage)
- Contributing factors + detection gaps
- Prevention plan with P0 (done — 512Mi emptyDir via kubernetes_json_patches
on the outpost config), P1 alerts, P2 Terraform codification, P3 upstream
- Lessons learned (check outpost logs first; cookie-less `curl` disproves
per-user symptoms fast; UI-managed Authentik config is invisible to git)
## Follow-ups not in this commit
- Prometheus alert for outpost /dev/shm usage > 80%
- Meta-alert for correlated Uptime Kuma external-monitor failures
- Decision on tmpfs sizing vs restart cadence vs probe-frequency reduction
(see discussion in beads code-zru)
Closes: code-zru
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds the `claude_oauth_token` Vault entries to the secrets table, a
new "OAuth token lifecycle" section explaining the two CLI auth modes
(`claude login` vs `claude setup-token`) and why we picked the latter
for headless use, the Ink 300-col PTY gotcha from today's harvest,
and the monitoring/rotation playbook for the new expiry alerts.
Follow-up to 8a054752 and 50dea8f0.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Replaces the stale "Dev VM SSH key" secret entry with the current
`claude-agent-service` bearer token path (synced to both consumer +
caller namespaces). Adds an "n8n workflow gotchas" section documenting:
1. The workflow is DB-state, not Terraform-managed — the JSON in the
repo is a backup, not authoritative.
2. Header-expression syntax: `=Bearer {{ $env.X }}` works, JS concat
`='Bearer ' + $env.X` does NOT — costs silent 401s.
3. `N8N_BLOCK_ENV_ACCESS_IN_NODE=false` requirement.
4. 401-troubleshooting steps and the UPDATE pattern for in-place
workflow patches.
Follow-up to 99180bec which fixed the actual pipeline break.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
## Context
The claude-agent-service K8s pod (deployed 2026-04-15) provides an HTTP API
for running Claude headless agents. Three workflows still SSH'd to the DevVM
(10.0.10.10) to invoke `claude -p`. This eliminates that dependency.
## This change
Pipeline migrations (SSH → HTTP POST to claude-agent-service):
- `.woodpecker/issue-automation.yml` — Vault auth fetches API token instead
of SSH key; curl POST /execute + poll /jobs/{id} replaces SSH invocation
- `scripts/postmortem-pipeline.sh` — same pattern; uses jq for safe JSON
construction of TODO payloads
- `.woodpecker/postmortem-todos.yml` — drop openssh-client from apk install
- `stacks/n8n/workflows/diun-upgrade.json` — SSH node replaced with HTTP
Request node; API token via $env.CLAUDE_AGENT_API_TOKEN (added to Vault
secret/n8n)
Documentation updates:
- `docs/architecture/incident-response.md` — Mermaid diagram: DevVM → K8s
- `docs/architecture/automated-upgrades.md` — pipeline diagram + n8n action
- `AGENTS.md` — pipeline description updated
## What is NOT in this change
- DevVM decommissioning (still hosts terminal/foolery services)
- Removal of SSH key secrets from Vault (kept for rollback)
- n8n workflow import (must be done manually in n8n UI)
[ci skip]
Co-Authored-By: Claude Opus 4 (1M context) <noreply@anthropic.com>
## Context
Deploying new services required manually adding hostnames to
cloudflare_proxied_names/cloudflare_non_proxied_names in config.tfvars —
a separate file from the service stack. This was frequently forgotten,
leaving services unreachable externally.
## This change:
- Add `dns_type` parameter to `ingress_factory` and `reverse_proxy/factory`
modules. Setting `dns_type = "proxied"` or `"non-proxied"` auto-creates
the Cloudflare DNS record (CNAME to tunnel or A/AAAA to public IP).
- Simplify cloudflared tunnel from 100 per-hostname rules to wildcard
`*.viktorbarzin.me → Traefik`. Traefik still handles host-based routing.
- Add global Cloudflare provider via terragrunt.hcl (separate
cloudflare_provider.tf with Vault-sourced API key).
- Migrate 118 hostnames from centralized config.tfvars to per-service
dns_type. 17 hostnames remain centrally managed (Helm ingresses,
special cases).
- Update docs, AGENTS.md, CLAUDE.md, dns.md runbook.
```
BEFORE AFTER
config.tfvars (manual list) stacks/<svc>/main.tf
| module "ingress" {
v dns_type = "proxied"
stacks/cloudflared/ }
for_each = list |
cloudflare_record auto-creates
tunnel per-hostname cloudflare_record + annotation
```
## What is NOT in this change:
- Uptime Kuma monitor migration (still reads from config.tfvars)
- 17 remaining centrally-managed hostnames (Helm, special cases)
- Removal of allow_overwrite (keep until migration confirmed stable)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Complete rewrite of the user-facing documentation:
- How to report outages and request features
- Mermaid flow diagrams for both incident and feature request paths
- SLA expectations (automated vs human response times)
- Self-service checks before reporting
- Severity level definitions
- Status page explanation
- Full technical architecture section with component inventory
- Safety guardrails, labels, and commit conventions
[ci skip]
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Documents the centralized Beads/Dolt task tracking system used by all
Claude Code sessions. Covers architecture, session lifecycle, settings
hierarchy, known issues, and E2E test verification.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Add separate CronJobs that dump each database individually:
- postgresql-backup-per-db: pg_dump -Fc per DB (daily 00:15)
- mysql-backup-per-db: mysqldump per DB (daily 00:45)
Dumps go to /backup/per-db/<dbname>/ on the same NFS PVC.
Enables single-database restore without affecting other databases.
Also fixed CNPG superuser password sync and added --single-transaction
--set-gtid-purged=OFF to MySQL per-db dumps.
Updated restore runbooks with per-database restore procedures.
[ci skip]
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds "Reporting an Issue" section with:
- Where to report (Slack, GitHub, DM)
- What to include (examples of good vs bad reports)
- What happens after reporting (flow diagram)
- Self-service status checks (Uptime Kuma, Grafana, K8s Dashboard)
[ci skip]
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Mark all 8 safe TODOs as Done. Add Follow-up Implementation table with commit
SHAs. Flag 3 Migration TODOs as needing human review.
Co-Authored-By: postmortem-todo-resolver <noreply@anthropic.com>
Added Uptime Kuma TCP monitor for PVE NFS (192.168.1.127:2049), ID 328,
Tier 1 (30s/3 retries). Investigation TODO flagged for human review.
Co-Authored-By: postmortem-todo-resolver <noreply@anthropic.com>
Key additions:
- NFSv3 broke after NFS restart (kernel lockd bug on PVE 6.14)
- All 52 PVs migrated to NFSv4, NFSv3 disabled on PVE
- DNS zone sync gap: secondary/tertiary had no custom zones
- Converted one-time setup Job to recurring zone-sync CronJob
- MySQL, Redis, Vault collateral damage and fixes
- 3 new lessons learned (zone replication, NFS client state, operator rollout)
[ci skip]
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Move HTML post-mortems from repo root post-mortems/ to docs/post-mortems/.
Update index.html with all 3 incidents (newest first).
[ci skip]
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Consolidate all outage reports under docs/ for better discoverability.
Moved from .claude/post-mortems/ (agent-internal) to docs/post-mortems/
(repo documentation).
[ci skip]
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Inbound:
- Direct MX to mail.viktorbarzin.me (ForwardEmail relay attempted and abandoned)
- Dedicated MetalLB IP 10.0.20.202 with ETP: Local for CrowdSec real-IP detection
- Removed Cloudflare Email Routing (can't store-and-forward)
- Fixed dual SPF violation, hardened to -all
- Added MTA-STS, TLSRPT, imported Rspamd DKIM into Terraform
- Removed dead BIND zones from config.tfvars (199 lines)
Outbound:
- Migrated from Mailgun (100/day) to Brevo (300/day free)
- Added Brevo DKIM CNAMEs and verification TXT
Monitoring:
- Probe frequency: 30m → 20m, alert thresholds adjusted to 60m
- Enabled Dovecot exporter scraping (port 9166)
- Added external SMTP monitor on public IP
Documentation:
- New docs/architecture/mailserver.md with full architecture
- New docs/architecture/mailserver-visual.html visualization
- Updated monitoring.md, CLAUDE.md, historical plan docs
Document fixes from 2026-04-10 London network debugging session:
- pfSense WG now dual-stack (IPv4+IPv6 via HE tunnel gif0 pf rule)
- GL-iNet AllowedIPs must be single comma-separated UCI entry (parse bug)
- AdGuardHome/carrier-monitor must not use 1.1.1.1 (conntrack + rate limit)
- Expanded troubleshooting for site-to-site tunnel disconnects
- Technitium DNS now at dedicated MetalLB IP 10.0.20.201 (was shared 10.0.20.200)
- Document LAN DNS path: pfSense NAT redirect preserves client IPs for Technitium logging
- Document pfSense dnsmasq role (K8s VLAN + localhost only, not WAN)
- Document pfSense aliases (technitium_dns, k8s_shared_lb) for NAT rule maintainability
- Update MetalLB table with per-service IP assignments
- Add ClusterIP (10.96.0.53) for CoreDNS internal forwarding
[ci skip]
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- vpn.md: Rewrite WireGuard section to match actual config (single tun_wg0
interface, 10.3.2.0/24 subnet, hub-and-spoke topology, correct device
names and subnets for London/Valchedrym)
- authentik-state.md: Document brute-force-protection policy unbinding fix
that was blocking all unauthenticated users from login flows
[ci skip]
