A manual/cool/quiet override in HA auto-reverts to `auto` after 60 min. Add a
Fan Lock (`input_boolean.r730_fan_lock`) that gates that automation so a
deliberate override persists, with a visible "🔒 FAN CONTROL LOCKED" banner on
the dashboard-it Server view so it isn't forgotten. The automation re-checks the
lock after the hour (locking mid-countdown cancels the revert) and the 83 °C
ceiling still wins. HA-side only (helper + automation + dashboard live on
ha-sofia, auto-git-tracked there); these docs are the infra-repo record.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The iDRAC reports only total DCMI watts + RPM (no per-fan power), so add a
cube-law fan-power estimate: fan_W ~= 0.0205*(RPM/1000)^3, calibrated to the
2026-06-05 sweep (fits within ~3W; ~2W floor -> ~99W full). The daemon reads
live RPM each loop and pushes pve_fan_control_fan_rpm + _fan_watts_est.
Surfaced in HA as sensor.r730_fan_power_est + a "Fan Power (est)" card on the
dashboard-it Server view, next to total power. 46 bash tests green; verified
live (9120rpm -> ~15W est).
[ci skip]
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the step-band fan curve with a continuous linear ramp — the bands
flapped at edges (e.g. 45<->65%). Web-researched: linear + 2-3C hysteresis
is the homelab standard; PID is overkill for this slow thermal loop.
fan% now interpolates between env-tunable anchors:
COOL 50C/30% -> 83C/100% (~2.1%/C; ~51% at the ~60C equilibrium)
QUIET 68C/20% -> 83C/100% (near-silent until ~70C)
Both reach 100% at the 83C ceiling. Anti-oscillation: asymmetric
hysteresis (fc_decide) + a MIN_STEP (3%) min-change threshold.
41 bash tests green; deployed + verified live (59C -> 49%, smooth).
[ci skip]
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Document the HA-control feature shipped in 8beca1df: the daemon reads the
ha-sofia r730_fan_mode/manual_pct helpers, the 60-min auto-revert automation,
and the dashboard-it Server-view sensors + control tiles.
[ci skip]
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The iDRAC stock curve runs the CPU at ~72°C on the 7080 RPM floor even
under load (optimises for quiet, not cool). Add a bash daemon + systemd
unit that drives the chassis fans from CPU temp on two curves, picked by
garage occupancy (the server is in the garage): COOL when empty
(measured ~58-65°C under load), QUIET near the silent floor when the
ha-sofia garage door shows someone is there (open, or <15min since last
activity).
Manual fan mode is backstopped: bash EXIT trap + systemd ExecStopPost
hand fans back to Dell auto on stop/crash; CPU>=83°C or repeated IPMI
failures do the same. Pushgateway metrics (job=fan_control). 36 unit
tests cover the pure curve/hysteresis/presence/parse logic; DRY_RUN +
RUN_ONCE for integration checks. Deployed and verified on 192.168.1.127
(CPU 70->58°C in cool mode, hysteresis stepping confirmed).
Design: docs/plans/2026-06-04-pve-fan-control-design.md
Runbook: docs/runbooks/fan-control.md
[ci skip]
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
