infra/docs/runbooks/fan-control.md

Runbook — PVE R730 fan-control daemon

Presence-aware IPMI fan controller on the PVE host (192.168.1.127). Runs the CPU cool when the garage is empty, quiet when someone's in the garage. Design: infra/docs/plans/2026-06-04-pve-fan-control-design.md.

What it is

• /usr/local/bin/fan-control — bash daemon (source: infra/scripts/fan-control.sh).
• fan-control.service — systemd unit (Type=simple, restarts on failure).
• /etc/fan-control.env — config incl. the ha-sofia token (chmod 600, not in git).

HA control (Home Assistant)

The daemon polls two ha-sofia helpers each loop, so you can drive the fans from HA — dashboard-it → "Server" view → Fans:

• input_select.r730_fan_mode — auto (garage-presence curve, default), cool / quiet (force that curve), manual (hold a fixed %).
• input_number.r730_fan_manual_pct — the % used in manual mode (slider).

Any non-auto override auto-reverts to auto after 60 min (automation.r730_fan_mode_auto_revert on ha-sofia), so a forgotten override can't run the fans wrong indefinitely. CEILING (83 °C) still overrides everything → Dell auto. An HA change is applied within one daemon loop (~15 s).

Monitoring sensors on the same view: sensor.r730_fan_speed (redfish exporter), sensor.r730_fan_control_target + sensor.r730_fan_control_mode (Pushgateway).

The HA objects (helpers, the auto-revert automation, the REST sensors in rest_resources/{idrac_redfish_exporter,fan_control}.yaml, and the dashboard cards) live on ha-sofia and are auto-git-tracked there by the version-control add-on — they are NOT in this repo.

Quick status

ssh root@192.168.1.127 systemctl status fan-control
ssh root@192.168.1.127 'journalctl -u fan-control -n 30 --no-pager'
ssh root@192.168.1.127 'ipmitool sdr type fan | grep ^Fan1; ipmitool sdr type temperature | grep "^Temp "'

Log lines look like temp=60C ha_mode=auto eff=cool fan=50% (was 70%) (ha_mode = the HA setpoint; eff = the effective curve applied).

Disable / roll back to stock firmware control

ssh root@192.168.1.127 'systemctl disable --now fan-control && ipmitool raw 0x30 0x30 0x01 0x01'

The unit's ExecStopPost already restores Dell auto on stop, so the explicit raw ... 0x01 is belt-and-suspenders. The box is back to its stock curve.

Tune

Edit /etc/fan-control.env on the host, then systemctl restart fan-control. Common knobs:

• HOLD_SECS — how long to stay quiet after the garage door last moved (default 900 = 15 min).
• CEILING — temp at which we abandon manual control and let the firmware take over (default 83).
• Curves themselves are arrays (COOL_CURVE, QUIET_CURVE) near the top of the script.

Deploy / update

cd infra
scp scripts/fan-control.sh     root@192.168.1.127:/usr/local/bin/fan-control
ssh root@192.168.1.127 chmod +x /usr/local/bin/fan-control
scp scripts/fan-control.service root@192.168.1.127:/etc/systemd/system/fan-control.service
# first install only — create /etc/fan-control.env from fan-control.env.example with the HA token
ssh root@192.168.1.127 'systemctl daemon-reload && systemctl restart fan-control'

HA token

/etc/fan-control.env holds a long-lived ha-sofia token used to read sensor.garage_door_state_bg. Mint via Home Assistant → Profile → Security → Long-lived access tokens, or reuse the existing ha-sofia token. If the token is missing/empty, the daemon still runs but COOL-only (no quiet mode) and logs ha_reachable=0.

Symptoms & checks

Symptom	Check
Fans stuck loud	journalctl -u fan-control — is mode=fallback? (ceiling breach or IPMI fail). Check CPU temp.
Never goes quiet	Token valid? curl -H "Authorization: Bearer $TOKEN" http://192.168.1.8:8123/api/states/sensor.garage_door_state_bg. Garage door reporting?
Fans flapping	Increase DEADBAND.
Service won't start	systemctl status fan-control; check ipmitool works: ipmitool sdr type temperature.
Box left in manual after crash	ipmitool raw 0x30 0x30 0x01 0x01 to force Dell auto.

Verify presence wiring

# one iteration, real IPMI + HA, no daemon loop:
ssh root@192.168.1.127 'set -a; . /etc/fan-control.env; set +a; RUN_ONCE=1 /usr/local/bin/fan-control'

With the garage closed for >15 min you should see mode=cool; within 15 min of the door moving, mode=quiet.